-System Information- |
Processor | Intel® Pentium® Processor N4200 (2M Cache, up to 2.5 GHz)
Intel® Celeron® Processor N3350 (2M Cache, up to 2.4 GHz)
Intel® Celeron® Processor J3455 (2M Cache, up to 2.3 GHz) | 6th Gen Intel® Core™ i7-6600U, 2-Core, 2.6GHz processor
6th Gen Intel® Core™ i5-6300U, 2-Core, 2.4GHz processor
6th Gen Intel® Core™ i3-6100U, 2-Core, 2.3GHz processor
6th Gen Intel® Celeron® 3955U, 2-Core, 2.0GHz processor | |
System Memory | 1 x 204-pin SO-DIMM Socket, Max, Up to 8GB DDR3L 1866MHz | 1 x 16GB DDR4 SDRAM | |
BIOS Information | AMI BIOS, 128Mbit SPI Flash ROM | | |
Watchdog Timer | H/W Reset, 1sec. ~ 65535sec and 1sec. or 1min./step | H/W Reset, 1sec. ~ 65535sec. | |
H/W Status Monitor | Monitoring CPU Temperature, Voltage with Auto Throttling Control
| Monitoring CPU & System Temperature and Voltage | |
SBC | ECM-APL2 | EBM-SKLUS | |
Expansion |
Expansion | 1 x Full size mini PCIe (SATA/PCIE/USB2.0)
1 x Half size mini PCIe (PCIE/USB2.0)
| 1 x Avalue 80-Pin IET Interface
1 x Mini PCIe, supports PCIex1/USB2.0
1 x M.2 (2242/3042) B-Key, supports SATA/ PCIex1/ USB3.0 | |
Storage |
Storage | 1 x 2.5” Drive Bay (7mm)
1 x mSATA | 1 x 2.5" Drive Bay
1 x M.2 (SATA) | |
I/O |
USB Port | 4 x USB 3.0 | 4 x USB 3.0 | |
COM Port | 1 x RS-232/422/485(Jumper&BIOS) | 2 x RS-232/422/485 (Jumper), supports auto-flow | |
Other | | 2 x SIM Card Slot
1 x SMBus
2 x PS2/ KB & MS
2 x Knockouts for Antenna Mounting | |
Antenna | 2 x Antenna Mounting with Dust Cover | | |
GPIO | | 1 x 12bit GPIO | |
Display |
Graphic Chipset | Intel® HD Graphics 500 (N3350/J3455)
Intel® HD Graphics 505 (N4200) | Intel® Skylake SoC integrated Graphics | |
Spec. & Resolution | 1 x VGA: Max. Resolution 1920 x 1200@60Hz
2 x HDMI 1.4b: Max. Resolution 3840x2160@30Hz (HDMI 1.4b) | DP: Max. resolution 4096x2304 @ 60Hz | |
Multiple Display | Triple Display | | |
Audio |
Audio Codec | Realtek ALC888S | Realtek ALC888S
supports 2.1-CH | |
Audio Interface | | Mic-In, Line-In and Line-Out | |
Ethernet |
LAN Chipset | 2 x Intel® I210AT
| 1 x Intel® I211AT
1 x Intel® I219LM
| |
Ethernet Interface | 10/100/1000 Base-Tx Gigabit Ethernet Compatible | 10/100/1000 Base-Tx GbE compatible | |
LAN Port | 2 x RJ45 | 2 x RJ-45 | |
Mechanical & Environmental |
Operating Temperature | With extended temperature peripherals:-10°C ~ 50°C (14°F ~ 122°F) with 0.2m/s air flow With 2.5” hard drive: 0°C ~ 40°C (32°°F ~ 113°F) with 0.2m/s air flow | (w/SSD), ambient w/ air flow
-20°C ~ 60°C (-4°F ~ 140°F)
| -40°C ~ 70°C (w/SSD) ambient w/ 0.5 air flow, WT sku, x6425E
-40°C ~ 60°C (w/SSD) ambient w/ 0.2 air flow, WT sku, x6425E
0°C ~ 65°C (w/SSD) ambient w/ 0.5 air flow, ST sku, J6413
0°C ~ 55°C (w/SSD) ambient w/ 0.2 air flow, ST sku, J6413
|
Storage Temperature | -30~70C° (-22°F ~ 158°F) | -30°C ~ 70°C (-22°F ~ 158°F) | -30°C ~ 70°C (-22°F ~ 158°F) |
Operating Humidity | 40°C @ 95% Relative Humidity, Non-condensing | 40°C @ 95% Relative Humidity, Non-condensing | 40°C @ 95% Relative Humidity, Non-condensing |
Weight | 2.65lbs(1.2KG) | 1.5kg (system)
2.4kg (w/ package) | 1.9 kg (System)
2.7 kg (w_Package) |
Construction | Aluminum + Metal | Aluminum + Metal | |
Mounting Kit | Stand (Default)
VESA Mount kit (Factory Option)
Din Rail kit (Factory Option) | Wall Mount kit (Standard)
| Wall mount kit (standard)
DIN RAIL (optional) |
Dimension (W x L x H) | 177mm x 123mm x 43.5 mm (7” x 4.8” x 1.7”) | 9.45" x 5.96" x 1.77" (240mm x 151.5mm x 45mm) | 240mm x 150mm x 43 mm (Standard)
240mm x 150mm x 64 mm (w/ IET module)
|
Vibration Test | With SSD: 5Grms, IEC 60068-2-64, Random, 10 ~ 500Hz, 30min/Axis, 3 Axis | With SSD : 5Grms, IEC 60068-2-64, Random, 5 ~ 500Hz, 1hr/axis | With SSD : 5Grms, IEC 60068-2-64, Random, 5 ~ 500Hz, 1hr/axis |
Shock Test | With SDD : 50G, IEC 60068-2-27, Half Sine, 11ms, Z Axis
| With SSD : 50Grms, IEC 60068-2-27, Half Sine, 11ms | With SSD : 55Grms, IEC 60068-2-27, Half Sine, 11ms |
Drop | ISTA 2A, IEC-60068-2-32 Test : Ed, 1 Corner, 3 Edges, 6 Faces | | |
IP Rating | | | IP 50 |
Certifications |
Certification Information | CE, FCC Class B, UKCA | | |
Software Support |
OS Information | Win 10, Linux | | |
Ordering Information |
Ordering Information | EPC-APL-42-C2-1R Intel® Pentium® Processor N4200 Fanless Tiny System
EPC-APL-33-C2-1R Intel® Celeron® Processor N3350 Fanless Tiny System
EPC-APL-34-C2-1R Intel® Celeron® Processor J3455 Fanless Tiny System
E1702031831R Australia Power Cord E1702031834R Japan Power Cord
E1702031833R USA Power Cord E170P060380R UK Power Cord
E1702031000R EU Power Cord
| EMS-SKLU-66-B1-1R 6th Gen Intel®Core™ Processor i7-6600U Fanless Rugged Embedded System
EMS-SKLU-63-B1-1R 6th Gen Intel®Core™ Processor i5-6300U Fanless Rugged Embedded System
EMS-SKLU-61-B1-1R 6th Gen Intel®Core™ Processor i3-6100U Fanless Rugged Embedded System
EMS-SKLU-39-B1-1R 6th Gen Intel®Celeron Processor 3955U Fanless Rugged Embedded System | EMS-EHL-J64-A1-1R
Intel® Celeron® SoC Processor J6413 Fanless Rugged Embedded System
EMS-EHL-X64-A1-1R
Intel® Atom™ SoC Processor x6425E Fanless Rugged Embedded System |
Power Requirement |
DC Input Connector | Lockable DC Jack | 3-Pin Terminal Block | |
DC Input | Typical 12/24 Vdc | Power input: Typical 12/24Vdc(+9V ~ +32V)
TVS component for surge protection
Reverse current/voltage protection | |
ACPI | Single Power ATX Support S0, S3, S4, S5
ACPI 5.0 Compliant | Single Power ATX Support S0, S3, S4, S5
ACPI 5.0 Compliant | |
Power Mode | AT/ATX (ATX is default setting) | AT/ATX (ATX is default setting) | |
Adapter | Input: 100 ~ 240Vdc/ 50 ~ 60Hz
Output: 12V/5A AC-DC 60W Adapter | Optional AC-DC Adapter | |
System Control |
LED Indicator | 1 x Power on/off LED on front side
1 x Storage Access LED on front side | | |
System Information |
Processor | | | Intel® Celeron® Processor J6413 (1.5M Cache, up to 3.00Ghz), ST, Tj=105°C
Intel® Atom® Processor x6425E(1.5M Cache, up to 3.00Ghz), WT, Tj=-40°C ~105°C
|
System Memory | | | 1 x 260-pin SODIMM socket Max. Up to 32GB DDR4 3200 MT/s |
Watchdog Timer | | | H/W Reset, 1sec. ~ 65535sec. |
H/W Status Monitor | | | CPU & system temperature monitoring and Voltages monitoring |
TPM | | | TPM 2.0 |
SBC | | | EBM-EHLS |
-Expansion- |
M.2 | | | 1 x M.2 Key-B 2242/3042/3052 support SATA3/ PCIe III/ USB3.2 Gen.1 and SIM slot1 (internal), default support 3.3V, jumper setting to adjust 3.3V/ 3.8V
1 x M.2 Key-E 2230 for Wi-Fi & BT Module (USB2.0/ PCIe III)
|
IET | | | 1 x IET interface (1 x DDI, 4x PCIeIII x1, 3 x USB2.0, 1 x Line-Out(R/L), 1 x SMBus, LPC) |
-Storage- |
M.2 | | | 1 x M.2 Key-B 2242/2280, support SATA
1 x M.2 Key-B 2242, support SATA (share with expansion slot) |
-Front I/O- |
COM Port | | | 2 x COM RS232/422/485 (select via BIOS, auto flow control via HW) |
Power Button | | | 1 x Push Button for Power on/off |
Reset Button | | | 1 x Push Button for Reset |
Wire-Control Power On/Off | | | 1 x 2-Pin Terminal Block for wire-control power on/off |
LED Indicator | | | 1 x Power LED (Blue)
1 x Storage LED (Yellow)- M.2 B-key SATA
1 x LTE LED (Green)- M.2 B-key PCIe
1 x Wifi LED (Green)- M.2 E key |
Digital I/O | | | 1 x 8-bit GPIO (DB9) |
Antenna | | | 2 x Antenna with dust cover |
-Rear I/O- |
USB Port | | | 2 x USB 3.1 Gen.2 (10Gbp/s)
2 x USB 3.1 Gen.1 (5Gbp/s), via USB Hub
|
HDMI | | | 1 x HDMI 2.0b
|
DP | | | 1 x DP 1.4
|
Audio | | | 1 x Mic-In, 1 x Line-Out |
RJ-45 | | | 2 x RJ45 |
Antenna | | | 2 x Antenna with dust cover |
-Right I/O- |
Antenna | | | 2 x Antenna with dust cover |
-Left I/O- |
Antenna | | | 2 x Antenna with dust cover |
-Display- |
Graphic Chipset | | | Intel® UHD Graphics for 10th Gen Intel® Processors |
Resolution | | | DP++ 1.4: 4096x2304 @ 60Hz
HDMI 2.0b : Max. resolution 4096x2304 @ 60Hz |
-Audio- |
Audio Codec | | | Realtek ALC888S (co-lay with ALC897) HD codec |
-Ethernet- |
LAN Chipset | | | 2 x Intel I226-IT |
Specification | | | 2x 10/100/1000/2.5G Base-Tx GbE compatible |
-Power Requirement- |
DC Input Voltage | | | DC in typical 12/24V (+9V ~ +36V), wide voltage single power input
TVS component for surge protection
Reverse current/voltage protection
(Max. Currency: 13A) |
DC Input Connector | | | 3-Pin Terminal Block (V+. V-, GND) |
ACPI | | | Single power ATX Support S0,S3, S4, S5
ACPI 5.0 Compliant
|
Power Mode | | | AT/ATX (ATX is default setting) |
-Software Support- |
OS Information | | | Win 10 64bit / Win 11 64 bit/ Linux |
-Certification- |
Certification Information | | | CE, FCC Class B, LVD 62368-1 |